Pipe RTP

“RTP” sewer pipes made of polypropylene and polymer copolymer with a nominal OD 32-110 mm are applied for the household sewerage at max. 80ºС of the permanent discharges and at 95ºС of the temporary (within 1 min.) discharges when a maximum flow level is 30 l/min. The pipes are manufactured by means of an uninterrupted screw extrusion followed by molding of a ball-mouthed part. Rubber wiper seals with a packing block are used as gaskets, which comply with DIN 4060. An installation requires usage of “RTP” special silicone grease. MOL get flexibility. Our motto ‘get flexibility’ is not only about flexible products, but also is an expression of mutual development together with the customer that leads to a successful and sustainable partnership that results from flexibility and commitment. A long-term experience and monitored quality systems (including DIN ISO 9001:2008) guarantee the highest possible safety and reliability.

Manufacturer

LLC “RTP” was founded in Y2005 as a manufacturer of plastic pipes and fittings according to the demands of the Russian and foreign markets. The plant is located in the Moscow region, Yegoryev district, vil. Lelechi, 47, where the first shop was built in Y20015 and the modern European equipment for production of the plastic pipes and fittings were installed.

All technical staff of LLC “RTP” completed preparation courses and tutorials in the European plants of equipment suppliers and obtained the applicable quality certificates. The foreign specialists were invited to perform such works as well. We use the best raw materials, meet the highest standards of production and perform product quality control.

Features

When placed in a project, the family fills in the specifications. The family uses common parameters in accordance with the Autodesk BIM 2.0 standard.

Demands

To use the program you must first install Autodesk Revit application.

Installation

1. Open both the source and target projects.
2. In the target project, click Manage tabSettings panel (Transfer Project Standards).
3. In the Select Items to Copy dialog, select the source project for Copy from.
4. Select the desired project standards (Pipe Types,Flex Pipe Types).
5. Click OK.